DCi 8|600DA
Eight-channel, 600W Power Amplifier with Dante™ Networked Audio, 2/4/8ω and 70V/100V(Now shipping)
The DriveCore Install DA series is a line of premium installation amplifiers with Dante™ networked audio transport that are based upon proprietary DriveCore technology. These amplifiers feature an efficient design with network control/monitoring, high-level DSP with JBL tunings, and 2ω/4ω/8ω/70V/100V direct output compatibility.
– Redundant, independent Dante ports
• Primary & Secondary
• Will accept 48khz or 96khz
• Capable of sending out Dante audio from analog inputs pre/post processing (@ 48kHz)
– Audio Architect Control and Monitoring
– DriveCore Amplifier Technology
– Universal PFC Power Supply
– DSP
• 48kHz processing
• 20 Presets
• Input router
– High, medium, and low priority inputs
• Input delay up to 2s
• Input EQ
• Crossover
• Output EQ
• Output Delay up to 100ms
• LevelMAX limiter
• Load Monitoring
– Pilot tone
• Normal
• Burst
– Continuous Load Monitoring
– Sweep Load Monitoring
• Channel Auto-Standby
• Speaker Tunings
– Aux-Port
• Sleep contact closure
• Amp Status output
– Removable air filters
– Front panel LED indicators
INTEGRATED DANTE™NETWORKED AUDIO – Simplifies installation by enabling Dante networked audio signals to be sent directly to the amplifier. Provides flexibility of installation options available with our expansive line-up of DriveCore Install amplifiers.
NETWORK CONFIGURATION, MONITORING & CONTROL – Better monitoring, control and audio manipulation with the HiQnet™ protocol over standard TCP/IP network. The HiQnet Audio Architect software allows for remote configuration, monitoring, and control of all aspects of the DCi-DA Series amplifiers.
PROGRAMMABLE GENERAL PURPOSE INPUT/OUTPUT PORT – GPIO ports can be configured in many different ways, such as volume controls, recall presets, or to report errors to third-party control system.
DIGITAL SIGNAL PROCESSING – DSP capabilities include the following:
LevelMAX Limiters
Input/Output EQ
Crossover
Delay
Matrix Router
Speaker Line Monitoring
